| Adjusting the headlight: Countries with right-hand drive traffic for driving in countries with left-hand drive traffic, ALHAMBRA 2011 |
| t
| In countries where vehicles are driven on the opposite side of the road to the vehicle's normal environment, both headlights must be partially masked by appropriately shaped opaque adhesive strips to prevent oncoming traffic from being dazzled by the asymmetric dipped beams. |
| t
| With the goal of adjusting the lights of a vehicle that drives on the right side of the road (left-hand drive) for driving on the left side of the road or for the lights of a vehicle that drives on the left side of the road (right-hand drive) for driving on the right side of the road, we have adhesive films that can be cut out and stuck on the headlight glass → Spare parts catalogue. |
Note | t
| Download the headlight adhesive film; ALHAMBRA 2011 |
| t
| Print out appropriate file to obtain adhesive film E.1/1. |
| t
| Cut out masking foil around circumference. This serves for positioning the masked area on the headlight. |
| t
| Cut out masking area marked on adhesive foil and then glue to headlight. |
Caution | Risk of damage to the plastic. |
| If using solvent-based cleaners, the plastic lens of the headlight could become damaged. |
| To remove any adhesive residue on the plastic headlight lenses, use only alcohol-based cleaning agents or those with a diluted alcohol mix (isopropanol). |
|
| Headlight, left-hand side: |
|
|
|
