Leon Mk2
Steering column combined switch: Assembly overview |
1 - | Steering column electronics control unit -J527-: |
q | Note the sequence for installation and removal → Chapter |
q | Removing and installing → Chapter |
q | Coding → Chapter |
2 - | Bolt. |
q | 3 off |
q | Tightening torque: 1.5 Nm |
3 - | Airbag spiral spring/retractor ring with collector ring -F138- |
q | Cannot be removed |
4 - | Steering column combination switch -E595- |
q | Note the sequence for installation and removal → Chapter |
q | Removing and installing → Chapter |
5 - | Steering column switch carrier |
q | Note the sequence for installation and removal → Chapter |
q | Removing and installing → Chapter |
6 - | Shear bolt |
q | 2 off |
q | M8x20 |
q | Shear-off moment: Approx. 15 Nm |
7 - | Steering lock body |
The removal and installation of the steering lock housing is carried out together with the base support of steering column switch. |
q | Note the sequence for installation and removal → Chapter |
q | Removing and installing → Chapter |
8 - | Ignition/starter switch and lock cylinder |
q | Removing and installing → Chapter |