Leon Mk2
| Steering column combined switch: assembly overview |
| 1 - | Indicator switch |
| t | The „indicator lever“ consists of the components indicator switch -E2-, the dipped light beam switch and the flasher light -E4- and, depending on the equipment, thecruise control switch -E45- or CCS. |
| t | The illustration shows the „indicator switch “ without the cruise control switch -E45- |
| t | Note the sequence for installation and removal: |
| t | Removing and installing → Chapter |
| 2 - | Base support of steering column module |
| t | Note the sequence for installation and removal: |
| t | Removing and installing → Chapter |
| 3 - | Windscreen wiper switch -E- |
| t | Note the sequence for installation and removal: |
| t | Removing and installing → Chapter |
| 4 - | Securing bolt |
| 5 - | Steering column electronics control unit -J527- |
| t | Note the sequence for installation and removal: |
| t | Removing and installing → Chapter |
| t | Coding → Chapter |
| 6 - | Airbag spiral spring/retractor ring with collector ring -F138- |
| t | Note the sequence for installation and removal: |
| t | Removing and installing → Chapter |
| t | Basic setting → Chapter |
| 7 - | Steering angle sensor -G85-Vehicles ►04.2009 |
Note| Vehicles 05.2009►, thesteering angle sender -G85- will now be installed in the steering box. → Running gear, axles, steering; Rep. gr.48 |
| t | Note the sequence for installation and removal: |
| t | Removing and installing → Chapter |
| t | Basic setting → Chapter |
