seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Turn signal switchE2: Removing and installing > < Pin assignment at steering column electronics control unitJ527 (front)
Pin assignment at steering column electronics control unitJ527 (reverse side)
Pin assignment at steering column electronics control unit -J527- (reverse side)
   
Multiple connector, 16 poles
1 - Earth
2 - Terminal 30
3 - Powertrain CAN bus screen
4 - not used
5 - GRA engaged Disconnected
6 - not used
7 - not used
8 - Data Bus Low (convenience)
9 - Data Bus High (convenience)
10 - Data drive Bus (screened) High
11 - Data drive Bus (screened) Low
12 - Ignition lock terminal 75
13 - Ignition lock terminal 15
14 - Ignition lock S contact
15 - Ignition lock terminal 50
16 - Ignition lock terminal P
  A94-0330

Turn signal switchE2: Removing and installing > < Pin assignment at steering column electronics control unitJ527 (front)