seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing tail light in rear lid, vehicles 11.03?? > < Removing and installing tail light in rear lid, vehicles ??05.00

Leon Mk2

Removing and installing tail light in rear lid, vehicles 06.00 ▸ 10.03
Removing and installing tail light in rear lid, vehicles 06.00 ► 10.03
The tail light in the rear lid consists of the left and right tail lights and a middle section with the number plate lights -X-. It installed as a single unit and must be remove as a complete item to remove a tail light.
Removing:
–  Switch off ignition and all electrical consumers and remove ignition key.
–  Remove rear lid trim → General body repairs, interior; Rep. Gr.70.
   
–  Pull connector -arrow- off both bulb holders.
  N94-0497
–  Remove the 4 securing nuts -arrows- on each tail light.
–  Unscrew number plate lights -X- and remove → Chapter.
  N94-0496
–  Remove securing nut -arrow- from middle section.
–  Carefully close rear lid and remove complete tail light unit.
Installing:
Install in reverse order of removal.
  N94-0495

Removing and installing tail light in rear lid, vehicles 11.03?? > < Removing and installing tail light in rear lid, vehicles ??05.00