Leon Mk2
| Assembly overview, 1.6l fuel injection engine, 77 kW |
| 1 - | Hexagonal bolt |
| q | M8 |
| q | 40 Nm |
| 2 - | Packing plate |
| 3 - | Idler wheel |
| 4 - | Packing plate |
| 5 - | Timing casing |
| 6 - | Hexagon nut with collar |
| q | M8 |
| 7 - | Cross-head bolt |
| q | M5x21 |
| q | 4.5 Nm |
| 8 - | Hexagonal nut, flat |
| q | M8 |
| 9 - | Packing plate |
| q | M5 |
| 10 - | Boot |
| 11 - | Star-head screw |
| q | M4x19 |
| q | 2 Nm |
| 12 - | Cross-head bolt |
| q | M4x13 |
| q | 2 Nm |
| 13 - | Voltage regulator |
| q | Remove and install voltage regulator → Chapter |
| 14 - | Alternator |
| q | Alternator: removing and fitting → Chapter |
| q | Removal and installation of the poly V belt pulley on the alternator → Chapter |
| q | Check alternator → Chapter |
| q | Fitting the battery's positive cable to the alternator |
| 15 - | Poly-V belt |
| q | Check poly-V belt → Chapter |
| q | Routing of poly V-belt → Engine assembly; Rep. Gr.13. |
| 16 - | Hexagonal bolts with collar |
| q | M8x90 |
| q | 23 Nm |
| 17 - | Hexagonal bolts with collar |
| q | M8x50 |
| q | 25 Nm |
| 18 - | Tensioning tool |
| 19 - | Bracket |
| q | For tensioning device and air conditioning compressor |
| 20 - | Hexagonal bolts with collar |
| q | M10x50 |
| q | 20 Nm + 1/4 turns (90°). |
| 21 - | Spacer sleeve |
|
