Leon Mk2
AEE, AEX, AKV, APQ, AUA, AUD engines with air conditioning |
1 - | Screws, M10 x 100, 50 Nm |
q | Aluminium engine block: Changing the screws (covered with sealant) |
q | Tightening order: First tighten the upper right position → Item, followed by the lower right position → Item, and finally the left hand side upper and lower screws (relative to the forward working direction of the vehicle) |
2 - | Screws, M10 x 100, 50 Nm |
q | Aluminium engine block: Changing the screws (covered with sealant) |
q | Tightening order: First tighten the upper right position → Item, followed by the lower right position → Item, and finally the left hand side upper and lower screws (relative to the forward working direction of the vehicle) |
3 - | Star-head screw |
4 - | Protective cap |
5 - | Nut, M8 |
6 - | Nut, M8 |
7 - | Star-head screw |
8 - | Voltage regulator |
q | Checking the brushes → Chapter |
q | Removing and installing → Chapter |
9 - | Alternator |
q | Tightening torque of cable B+ → Anchor |
10 - | Ribbed belt |
q | Removing and installing → Chapter |
q | Path of the Poly-V belt → Fig. |
11 - | Hermetic (airtight screw), M8 with a hexagonal interior |
12 - | The pulley of the power assisted steering pump |
13 - | Tension roller |
14 - | Screws, M8 x 85, 25 Nm |