Leon Mk2
4 cyl. injection motor with basic belt activation, distinctive letters AKK, ALD, ANV, ANW, AUC, AFR and AST |
1 - | Hexagon bolt |
q | Gray electrical block: M10 × 50 mm |
q | Aluminium cylinder block: M 10 × 55 mm. Replace bolts (coated with sealant) |
q | 55 Nm |
2 - | Hexagonal nut M8 |
3 - | Star-headed screw |
q | M5 × 20 mm |
4 - | Protective cap |
5 - | Star-headed screw |
q | M4 × 20 mm |
6 - | Voltage regulator |
q | Removal and installation → Item, → Item, → Item, → Item |
q | Checking Brushes → Chapter, alternator brushes: checking |
7 - | Alternator |
q | Tightening torque of cable B+ on the alternator → Chapter, Ribbed, Poly-V belt driven compact alternator |
8 - | Ribbed belt |
q | Removing and installing → Chapter, Ribbed belt Poly-V; dismount and installation |
q | Installation of the Ribbed belt Poly-V → Chapter, Installation of the ribbed belt Poly-V |
9 - | Hexagon bolt |
q | Grey fusion block M8 × 22 mm |
q | Aluminium cylinder block: M8 × 25 mm. Replace bolt (coated with sealant) |
q | 25 Nm |
10 - | Hexagonal screws M8 × 35 |
q | M8 × 35 mm |
q | 25 Nm |
11 - | Step tension |
q | Note tightening sequence → Chapter, Installation of the Ribbed belt Poly-V |
12 - | Hexagon bolt |
q | M8 × 85 mm |
q | 25 Nm |
q | Note tightening sequence → Chapter, Installation of the Ribbed belt Poly-V |
13 - | Support |