seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
3 cylinder diesel engine|Install > < Poly-V belt: removing and installing

Leon Mk2

Remove
Remove
–  Remove the soundproofing sump: → Bodywork - installation work; Rep. Gr.50
–  Remove the soundproofing cover from the engine.
–  Remove the connecting line between the intercooler and the intake manifold air intake hole.
–  Remove the air mass meter unit and set it to one side.
–  Mark the direction of rotation of the Poly-V belt.
   
–  Pivot the tensioning roller in the direction of the -arrow- (see illustration).
  A13-0083
–  Immobilise the tensioner with pin -T10060-.
–  Remove the Poly-V belt.
  N13-0576

3 cylinder diesel engine|Install > < Poly-V belt: removing and installing