seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Tightening torques:Battery > < Voltage stabilizerJ532 , ? 5/2011: Removing and installing

Leon Mk2

Voltage stabilizerJ532 , 6/2011 ▶: Removing and installing
Voltage stabilizer -J532- , 6/2011 ▶: Removing and installing
Removing:
–  Switch off ignition and all electrical loads, and pull out ignition key.
–  Remove the right plenum chamber cover → General body repairs, exterior; Rep. gr.50.
–  Undo the screws on both sides of the plenum chamber bulkhead → Bodywork, exterior fitting work; Rep. gr.50 in order to be able to move the plenum chamber bulkhead.
   
–  Undo the fixing screw -2- from the Voltage stabilizer -J532--1-.
  E27-10073
–  Turn the Voltage stabilizer -J532--1- to the left -arrow-.
–  Undo the fixing screw -2- from the Voltage stabilizer -J532--1-.
–  Unlock the connector and disconnect from the Voltage stabilizer -J532-.
–  Remove the Voltage stabilizer -J532- from the plenum chamber.
Installing:
Installation is carried out in reverse order.
  E27-10074

Tightening torques:Battery > < Voltage stabilizerJ532 , ? 5/2011: Removing and installing