seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Vehicles with 1.4l fuel injection engine (51, 55 and 74 kW), manual gearbox > < Check starter motor B

Leon Mk2

Vehicles with 1.2l fuel injection engine (40 and 47 kW), manual gearbox
Vehicles with 1.2l fuel injection engine (40 and 47 kW), manual gearbox
Special tools and workshop equipment required
t  Torque wrenches -SAT 8010-
Removing:
–  Disconnect battery → Chapter.
   
–  Release and detach the connection -1- on terminal 50.
–  Remove star head screw -2-.
–  Unscrew the rear securing bolt found behind it and remove the cable from the magnetic switch on terminal 30.
  N27-0187
–  Remove the support for the coolant hose -1-.
–  Unscrew both securing screws -arrows- and remove the starter motor upwards out of vehicle.
Fitting:
Installation is carried out in the reverse sequence; note the following:
–  Tighten the fastening bolts or nuts to the torques shown → Chapter .
–  Connect battery → Chapter.
  N27-0067

Vehicles with 1.4l fuel injection engine (51, 55 and 74 kW), manual gearbox > < Check starter motor B