seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
1.9 and 2.0 litre TDI engine > < Compact holder tightening sequence, Vehicles without air conditioner

Leon Mk2

Compact holder tightening sequence, Vehicles with air conditioner
Compact holder tightening sequence, Vehicles with air conditioner
   
Compact support tightening sequence on the cylinder block
Work sequence:
–  Position compact support on the cylinder block.
  Note
Position all the bolts before tightening to prescribed torques.
–  Tighten the bolts attaching the compact support in the following order:
A - Hexagonal bolt with collar, M10x45, 52 Nm, calibrated opening
B - Hexagonal bolt with collar, M10x45, 52 Nm
C - Hexagonal bolt with collar, M10x45, 52 Nm
D - Hexagonal bolt with collar, M10x45, 52 Nm
E - Hexagonal bolt with collar, M10x45, 52 Nm
F - Hexagonal bolt with collar, M10x45, 52 Nm
  N27-10197

1.9 and 2.0 litre TDI engine > < Compact holder tightening sequence, Vehicles without air conditioner