seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Spray jet: adjustment > < Exploded view of the rear window wiper, 02.2012?
Rear window wiper: adjust final position
Rear window wiper: adjust final position
Special tools and workshop equipment required
   
t  torque wrench set -SAT 8010-
  L00-10226
–  Put the windscreen wiper arm, with the wiper blade fitted, on the windscreen wiper shaft. Align the wiper blade on the rear window, in the following manner:
  E92-0047
Vehicle modelIbiza 2008 Ibiza ST 2010Ibiza 2012 3PIbiza 2012 5PIbiza ST 2012
Dimension -a-23.8 mm.23.8 mm.24 mm.34 mm.18 mm.

  Note
t  The measurement -a- gives the distance from the point of the wiper blade to the lower edge of the window.
t  According to the version, the measurement for the adjustment is engraved on the rear window -a-.
Rear window wiper arm torque: 12 Nm
–  Switch ignition on.
–  Activate the rear window washer and ensure the wiper arm reaches the resting position.
–  Re-check the windscreen wiper arm adjustment; correct it if necessary.
   

Spray jet: adjustment > < Exploded view of the rear window wiper, 02.2012?