seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Installing wiper frame with linkage and wiper motor > < Installing windscreen wiper system (vehicles ??09.98)
Installing wiper motor in wiper frame
Installing wiper motor in wiper frame
–  Reconnect battery → Chapter.
–  Run wiper motor to park position by connecting connector to wiper motor and briefly operating wiper switch.
–  Disconnect battery → Chapter.
–  Disconnect connector again and secure wiper motor to wiper frame using securing bolts (10 mm AF).
–  Tighten threaded connection to specified torque setting → Chapter.
   
–  Align lever -1- to marks on wiper frame and fit onto motor drive shaft, then tighten securing nut -2- hand-tight.
–  Lock lever - 1-.
–  Tighten securing nut -2- on motor shaft.
–  Tighten threaded connection to specified torque setting → Chapter.
  N92-0022
–  Unclip both ball joints of right rod in illustration -arrows-.
–  Unclip outer ball joint of left rod in illustration -arrow-.
  N92-0023

Installing wiper frame with linkage and wiper motor > < Installing windscreen wiper system (vehicles ??09.98)