seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Repairing connector housings and electrical connectors > < repair kit for support cables VAS 1978
Indications about the repair of support cables and connectors
Indications about the repair of support cables and connectors
  Caution
Disconnect the battery earth strap before carrying out any work on the electrical system.
Do not repair shielded cables. If they are damaged then they must be replaced.
For any repairs to the Airbag cables, only switches, cables and connectors designed for this system can be used → Spare parts Catalogue.
Before beginning any repair work, the cause of the problem must be eliminated: Sharp edges in the body work, faulty electrics, corrosion, etc.
Repairs to cables should only be done using yellow coloured cables.
If yellow wires are already present and there is yellow isolating tape in the area, this indicates that repairs have already been carried out.
After each repair the correct functioning of the system affected should be verified and, in case of any doubt, erase the fault memory and put the systems onto basic adjustment mode.
   

Repairing connector housings and electrical connectors > < repair kit for support cables VAS 1978