seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
4-position relay carrier: Removing and installing > < 9-position relay carrier: Removing and installing

Leon Mk2

3-position relay carrier: Removing and installing
3-position relay carrier: Removing and installing
Removal:
   
–  Switch off ignition and all electrical consumers and take out ignition key.
–  Remove storage compartment (driver side) → Rep. gr.68.
–  Undo the screws -1- and remove the -3- fold relay carrier.
  Note
Disregard: -Pos. 3- and -Pos. 4-.
–  Unclip the fuse holders at the 3-position relay carrier.
–  Detach relays and control units and then unclip appropriate relay carrier.
  Note
Exact assignment of contacts in 3-position relay carrier can be found in appropriate current flow diagram → Current flow diagrams, Electrical fault finding and Fitting locations.
Installation
Installation is carried out in reverse order, noting the following:
–  Fit the shelf compartment on the driver's side → Rep. gr.68.
Tightening torque
  A70-0813
Components:Nm
3-position relay carrier to dash panel central tube3

   

4-position relay carrier: Removing and installing > < 9-position relay carrier: Removing and installing