Removing and installing connection socket for towing hitch - Version 1
Removing and installing connection socket for towing hitch - Version 1
Removing and installing connection socket for towing hitch - Version 1
Removal:
–
Switch off ignition and remove key.
–
Remove bolts -arrows-.
–
Remove the fixing plate connection terminal.
Terminal connection with contact switch for rear disconnectable foglight -F216-:
–
Unplug the connector -2- for the disconnectable rear fog light contact switch -F216- and remove the connection-1- outside of the towing current supply -U10-.
Terminal connection without contact switch for rear disconnectable foglight -F216-:
–
Remove the multiple connectors -1- from the connection box -2- in the -direction of the arrow-.
Version 1
–
Unblock the safety clips -arrows- and later the fixing clips -1- and -3 ... 5-.
–
Remove the fixing cage of the connectors -2-.
Version 2
–
First unclip the retaining lugs -arrows- and later the fixing clips -1, 2, 3, 4, 6, 7-.
–
Remove the fixing cage of the multiple connector -5-.
Installation
Installation is carried out in reverse order, noting the following:
Note
Make sure the joint gaskets are not damaged -1- and -3-.
–
Introduce the connectors -4- until they audibly engage in the fixing cage -2-.