seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Treat with preservative > < Servicing screw connections

Leon Mk2

Clean the battery terminals and poles
Clean the battery terminals and poles
Special tools and workshop equipment required
   
t  SAT 8010
  Note
Never use rust dissolvers, contact sprays or grease etc. as an excessive tightening torque will be used when tightening due to the lack of thread grip, which may lead to a broken screw connection.
  WARNING
Injury risk! Remember warnings and safety instructions .
–  Disconnect battery.
–  Check the battery terminals and poles for rust and dirt.
  W00-2760
–  Clean the terminal using circular movements of the steel wire brush of the pole terminal cleaner.
  N97-10792
–  Clean the poles with circular movements with the underside of the pole terminal cleaner.
  WARNING
Injury risk! Remember warnings and safety instructions . → Chapter
–  Reconnect the battery and secure the pole to the corresponding tightening torque.
  Note
For optimum contact, the elements must be tightened to the correct tightening torque after cleaning.
  N97-10793

Treat with preservative > < Servicing screw connections