Instructions for unlocking and dismantling connector housings |
WARNING Some tools are equipped with a tool safety device. This must be pushed over the tip of the tool after use in order to protect the tip and prevent personal injury. |
|
Note t
| Observe general information on repairs to vehicle electrical system → Chapter. |
t
| To release, always use the correct release tools. Under no circumstances should contacts be removed from the connector housing by force. |
t
| Always renew damaged connector housings. |
t
| As an aid to disengage the secondary locking mechanisms, a small screwdriver can be used. |
t
| The assignment of the connections is partly stamped on the secondary lock or on the rear of the connector housing. |
|
|
|