seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Coding immobilizer control unit J362 (W-wire), vehicle 09.97?? > < Coding immobilizer control unit J362

Leon Mk2

Coding immobilizer control unitJ362, vehicle ▸ 08.97
Coding immobilizer control unit -J362-, vehicle ► 08.97
–  Initiating immobilizer self-diagnosis → Chapter.
   
Indicated on display:
–  Press “07 - Code control unit” on the display -arrow-.
  N01-0583
Indicated on display:
The following coding is possible for the Alhambra:
l  09600
  Note!
The coding (baud rate) is valid for petrol engines and direct injection turbo-diesel engines.
–  Press the corresponding keys on the number pad on the display -arrow-.
–  Confirm entry by pressing Q key on number block on display -arrow-.
  Note!
t  If the immobilizer control unit cannot detect the correct Baud rate, then the coding is set to the value “00000”.
t  The fault “Control unit defective” is stored in the fault memory → Anchor.
  N02-0547

Coding immobilizer control unit J362 (W-wire), vehicle 09.97?? > < Coding immobilizer control unit J362