seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Radio: removing and fitting|Installation > < Radio: removing and fitting

Leon Mk2

Removal:
Removal:
The extractors -T20184- must not be bent.
Carry out the following procedure:
   
–  Insert the extractors -T20184-,into the unlocking grooves, as shown in the illustration until they fit into place.
–  Remove the radio from the instrument panel by carefully pulling the upper extractors by the handle, the lower extractors will function without needing to be touched.
–  Detach the apparatus from its housing, until the rear connections are accessible.
  E91-10002
–  Press connector locking element in direction indicated by -arrows-.
  N91-10011
–  Turn retainer plate in direction indicated by -arrow-, and unplug connector.
  N91-10013
–  Unblock locking element of aerial connector -arrow-.
  N91-10012

Radio: removing and fitting|Installation > < Radio: removing and fitting