SEAT Workshop Service and Repair Manuals

Removing: Before beginning with the assembly work, the following measures must be carried out: –  Remove any CD's left in the equipment → Owner's Manual. –  Disconnect ignition and all electrical loads, and remove ignition key. Special tools and workshop equipment required

t  Lever -U 30800-

Carry out the following procedure:

–  Using the removal wedge -3409-, carefully lift and remove the central console cover in the area of the -arrow-. –  Unscrew the screws -arrows- on the radio / navigation system. –  Remove the radio / navigation system a little from its housing, until the connections on the rear side of the radio / navigation system can be accessed.

–  Press connector locking element in direction indicated by -arrows-.

–  Move retainer plate in direction of the -arrow-, and detach the plug connector.

–  Unlock the connector -arrow- from the aerial connection and remove it.