seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing wiper motor > < Removing and installing windscreen wiper arms

Leon Mk2

Adjusting windscreen wiper arms
Adjusting windscreen wiper arms
Special tools and workshop equipment required
   
t  Torque wrench -V.A.G 1331-
  Note
On RHD vehicles, the wiper blades are a mirror image of those on LHD vehicles.
–  Move wipers to park position and then switch off ignition.
–  Adjust windscreen wiper park position.
  Note
  W00-0427
The specified setting position for the windscreen wiper blade park position -a- must be measured and adjusted between the middle of the wiper blade tip -1- and the top of the plenum chamber cover -2-.
  N27-11009
Driver side:
Distance -a- between middle of wiper rubber -1- and upper edge of plenum chamber cover -2- on driver side -B- must be 30 mm.
–  Adjust wiper blade park position by moving wiper arm if necessary → Chapter.
–  Tighten threaded connections to torque specified in assembly overview → Chapter.
  N92-10303
Front passenger side:
Distance -a- between middle of wiper rubber -1- and upper edge of plenum chamber cover -2- on passenger side -A- must be 30 mm.
–  Adjust wiper blade park position by moving wiper arm if necessary → Chapter.
–  Tighten threaded connections to torque specified in assembly overview → Chapter.
  N92-10303

Removing and installing wiper motor > < Removing and installing windscreen wiper arms