skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Summary of the components - for the complete rear spoiler (RS) > < Summary of the components - for the complete rear spoiler (Combi)

Fabia Mk1

Removing and installing rear spoiler completely (Combi)
Removing and installing rear spoiler completely (Combi)
Special tools and workshop equipment required
t  Cutting wire with holder (e.g. -V.A.G 1351-)
t  Glue sealing mass -HHA 381 013-
t  Cleaning solution -D 009 401 04-
Removing the spoiler
–  Cut off the spoiler from the tailgate (cut through the glue sealing mass).
–  Remove the spoiler.
  Note
Do not damage the painted surfaces.
Installing the spoiler
–  Clean the body and seating area for the spoiler with cleaning solution -D 009 401 04- while observing the instructions issued by the manufacturer.
   
–  Spread the glue sealing mass -1- onto the marked spoiler surface.
–  Centre the spoiler on the tailgate.
–  Press the spoiler onto the tailgate.
–  Secure the correct location of the spoiler using adhesive tape.
–  Remove any dirt present using a cleaner.
  Note
t  The glue sealing mass must dry for 2 hours. Do not drive the vehicle in this time.
t  Do not drive into the carwash within 24 hours of gluing on the spoiler.
  S66-0124

Summary of the components - for the complete rear spoiler (RS) > < Summary of the components - for the complete rear spoiler (Combi)