skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Removing and installing driver airbag unit ? 07.04 > < Safety precautions when working on the airbag system
Replacing parts of the airbag system
Replacing parts of the airbag system
Registering parts of the airbag system
If a part of the airbag system is to be replaced using original parts the self-adhesive labels with the number should be removed, placed on registration card no. 000 010 100 A and sent in for registration to the customer service network (Czech Republic) or the importer (in the case of other countries).
t  Airbag control unit
t  Driver airbag unit
t  Passenger airbag unit
t  The side airbag unit on the driver's side with seat cover
t  The side airbag unit on the front seat passenger's side with seat cover
t  Crash sensor side airbag on the driver's side.
t  Crash sensor side airbag on the front passenger's side
Accident with deployment of airbag
The following parts should always be replaced with new original parts:
t  Airbag control unit → Note
t  Driver airbag unit → Note
t  Passenger airbag unit → Note
t  Driver side airbag unit → Note
t  Passenger side airbag unit → Note
t  Restoring ring with slip ring → Note
t  Driver seat belt tensioner with seat belt → Note
t  Passenger seat belt tensioner with seat belt → Note
1)  In the event of ignition.
2)  Ignition of driver's airbag unit.
3)  If the side airbag unit has ignited the unit may again be used - up to three times.
Replace all damaged parts if necessary (visual inspection) with new original parts.
The airbag control unit must be coded after the replacement → Chapter.
Accident without deployment of airbag unit
t  If the airbag warning light - K75- does not signal any fault and if no parts of the airbag system are damaged there is no need to replace any parts of the airbag system. Pay special attention to examining the seat belts.
   

Removing and installing driver airbag unit ? 07.04 > < Safety precautions when working on the airbag system