| Removing and installing parts of the fuel supply - Part 1 |
Note | t
| The fuel lines are connected with quick-release fittings, which are loosened by pressing in the circlip. |
| t
| Fuel hoses at the engine must only be secured with spring-type clips. The use of clamp-type or screw-type clips is not allowed. |
| t
| Use pliers for spring strap clips to fit the spring strap clips. |
| t
| The fuel supply system must be bled after removal of the fuel filter, fuel delivery unit and the fuel rail → Chapter. |
| Electronic Engine Power Control (Electronic throttle) → Chapter. |
|
|
|
