Workshop Repair Manuals

Skoda Workshop Manuals

[PREV PAGE] [NEXT PAGE]

skoda Workshop Repair Guides


Fabia Mk2

Power unit > 1.2/44; 47; 51; 55 kW MPI engine > Mixture preparation system, electronic inj.,Gas > Fuel Injection System > Fuel strip with injection valves - Summary of components > For engines with identification characters BZG, CGPA, CGPB, CEVA, CJLA, BME

For engines with identification characters BZG, CGPA, CGPB, CEVA, CJLA, BME
For engines with identification characters BZG, CGPA, CGPB, CEVA, CJLA, BME
Fabia II, Roomster
   
1 - Bleeder supports
q   after replacing the fuel tank, bleed the fuel supply with the valve on the fuel strip → Chapter
2 - Fuel strip
3 - O-ring
q   replace
4 - Injection valves -N30…N32-
q   mount with a retaining clip
q   before fitting O-rings moisten lightly with clean engine oil
q   Inspecting the injection rate, tightness and jet formation of the injectors → Chapter
q   Resistance value: 12…17 Ω (at approx. 20 °C)
5 - Retaining clip
q   pay attention to the correct seating on the injection valve and the fuel strip
6 - Feed line
q   black hose with a white marking
q   secure with spring strap clamps
q   check for firm seating
q   from fuel filter
7 - 10 Nm

   

Power unit > 1.2/44; 47; 51; 55 kW MPI engine > Mixture preparation system, electronic inj.,Gas > Fuel Injection System > Fuel strip with injection valves - Summary of components > For engines with identification characters BZG, CGPA, CGPB, CEVA, CJLA, BME

[PREV PAGE] [NEXT PAGE]