skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Fog lights, fog lights with the "Corner" function and daylight driving light > < High level brake light

Fabia Mk2

Removing and installing high level brake light and light strip
Removing and installing high level brake light and light strip
Removing
–  Switch off the ignition and all electrical components.
–  Remove trim panel for tailgate (except Scout vehicles with plastic trim panel for tailgate) → Body Work; Rep. gr.70.
   
–  Slightly press the light downwards -arrow- and unclip clips from the openings in the tailgate -detail-.
Except Scout vehicles with plastic trim panel for tailgate:
  S94-0228
–  Put hand through the opening in the tailgate, press catch peg -arrow- and take out light.
Scout vehicles with plastic trim panel for tailgate:
–  Unclip light from the bearing in the trim panel for tailgate.
All vehicles:
–  Disconnect the plug connection.
  S94-0227
–  Press off catch pegs -1- and remove light strip -2- upwards -arrows-.
–  Installation is carried out in the reverse order.
  Note
The light strip is fitted with LEDs, which cannot be replaced individually. If defective replace the complete light strip.
  S94-0226

Fog lights, fog lights with the "Corner" function and daylight driving light > < High level brake light