| –
| Remove fixing screw -2- (1.5 Nm) of the door handle -1-. |
| –
| Remove bottom trim panel for tailgate -3- from tailgate -5-. |
| –
| Loosen bottom trim panel for tailgate -3- at rear and on the sides -arrows B- with edge -3409- (begin in the area of the -arrow A-). |
| –
| Loosen bottom trim panel for tailgate -3- at front -arrow C- with edge -3409- and remove trim panel from the tailgate -5-. |
| –
| Installation is carried out in the reverse order; pay attention to the following points: |
| –
| Recondition the clips -4- in the bottom trim panel for the tailgate -3-, if necessary replace with new ones. |
|
|
|
Note
