skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Registration number lighting > < Replace light bulb for the door entry lighting
Removing and installing door entry lighting
Removing and installing door entry lighting
Removing
–  Switch off the ignition and all electrical components.
–  Remove mirror glass → Body Work; Rep. gr.66.
   
–  Release screws -1- and -3- (0.7 Nm).
–  Slacken the upper rearview mirror cover -2- from the catches -arrows- and remove towards the top -movement arrows- from the mirror housing.
  S94-0278
–  Remove the socket with the light bulb -2- from the door entry lighting.
–  Release screws -arrows- (0.8 Nm) and unhook the lower rearview mirror housing cover -1- to the bottom.
  S94-0281
–  Release screws -2- (0.5 Nm) and remove door entry lighting -3-.
Install
Installation is performed in the reverse order, pay attention to the following points:
–  Perform a functional test (illumination, mirror adjustment).
  S94-0282

Registration number lighting > < Replace light bulb for the door entry lighting