ForTwo L3-1.0L (2009)
Paint: Description and Operation
AH98.00-P-9409-01SM Abbreviations in the painting sector
AH98.00-P-9409-01SM Abbreviations In The Painting Sector
General abbreviations
AbfG
Waste Disposal Law
AbfNachwV
Waste Verification Act
AbwAG
Waste Water Disposal Law
AVwV
General Administrative Regulation
ATL
Anodic immersion painting
ATV
Specifications governing waste water handling as set forth in the German Waste Water Association e.V.
bar (atmospheres)
Measurement of air pressure
BImSchG
Law for the Protection Against Harmful Environmental Effects of Air Pollution, Federal Immissions Law
DD
Two-component polyurethane paint with designation "Desmophen Desmodur"
DIN
German Institute for Standardization
DNA
Committee for German Standards
Elex V
Regulations on Electrical Facilities in Hazardous Locations
EPC
Electro powder coating (ETL)
ETL
Electro immersion painting
GPSG
Technical working materials and consumer products act
GefStoffV
Hazardous Substances Act
GGVS
Hazardous Goods Transport Regulations
Sulfuric acid anodizing Impulse limit volume spray
HS
High solid
KTL
Cathodic immersion painting
KH
Artificial resin
KS
Plastic
MAK
Maximum workplace concentration
MBL
Mercedes-Benz Delivery Specifications
ms
Medium solid
OWiG
Infringement Law
PVK
Pigment volume concentration
pH-value
Potential hydrogenium concentration of hydrogen ions in a hydrous solution
RAL
"Reich" Committee for Terms of Delivery and Quality Assurance at the Committee for German Standards
TA Noise
German Noise Act
TA Air
German Clean Air Act
TRbF
Technical Rules for Flammable Liquids
TRgA
Technical Rules for Hazardous Materials
Trg A
Technical Directives for Hazardous Materials
TRGS
Technical Rules for Hazardous Substances
USB
Environment officer
UWS
Environmental protection
VAwS
Directive on Facilities for the Storage, Bottling and Turnaround of Substances Harmful to Ground Water
VBF (Front control panel)Directive on Flammable Liquids
VDI
Directives of the Association of German Engineers
VLwF
Directive on the Storage of Liquids Harmful to Ground Water
WHG
Water Resources Law
µm
1 micrometer=1/1000 mm, unit of measurement of coating thickness
2 K
Two-component
Abbreviations for hazardous materials classes
A I
Flash point below 21 °C
A II
Flash point above 21 °C to 55 °C
A III
Flash point above 55 °C to 100 °C
Abbreviations for plastics
ABS
Acrylonitrile-butadiene-styrene
AMMA
Acrylonitrile-methylmethacrylate
BFK
Boron filament reinforced plastic
CA
Cellulose acetate