ForTwo L3-1.0L (2009)
5
Remove left drift (5) from crossmember (1).
Aid of helper required.
6
Align crossmember (1) in relation to markings on right A-pillar.
Aid of helper required If it is not possible to align crossmember (1) with drift (5) inserted, remove.
7
Align assembly wedge (2) with push-in device (4) by turning knurled screw (3).
8
Remove right drift (5) from crossmember (1).
Aid of helper required.
9
Screw bolts (8, 9) on crossmember (1) to stop.
Aid of helper required. Ensure that bolts (8, 9) do not fall into A-pillar opening.
10 Tighten bolts (6, 7, 8, 9) with specified tightening torque.
Aid of helper required.