B9 Tribeca F6-3.0L DOHC (2006)
-
Install the wire harness securely with the specified clips to avoid interference or tangled with other parts.
-
Do not allow water or oil to come in contact with the connector terminals. Also do not touch the connector terminals.
-
Either of the airbag modules for driver's, passenger's, side or curtain, or the pretensioner must not be disassembled.
-
The airbag module cannot be used again if deployed once.
-
After removal, keep the airbag module with the pad side facing upward on a dry, clean and flat surface away from heat, light sources, moisture and
dust.