Baja F4-2.5L SOHC (2003)
4. Insert piston into cylinder.
CAUTION: Do not force piston into cylinder.
5. Apply a coat of specified grease to boot and fit in groove on ends of cylinder and piston.
Grease: NIGLUBE X-2 (Part No. 003606000)
6. Install the piston boot to the caliper body, and attach boot ring.
7. Apply a coat of specified grease to guide pin, outer surface, sleeve outer surface, cylinder inner surface, and boot grooves.
Grease: NIGLUBE RX-2 (Part No. 003606000)
8. Install guide pin boot on caliper body.
9. Install lock pin boot on caliper body and insert lock pin sleeve into place.