Baja F4-2.5L SOHC (2003)
6. Remove bolts which hold rear sensor harness brackets.
7. Remove rear ABS sensor from rear arm.
8. When inspecting rear tone wheel, remove rear drive shaft as rear tone wheel is unitized with BJ assembly of rear drive shaft.
CAUTION:
^
Be careful not to damage pole piece located at tip of the sensor and teeth faces during removal.
^
Do not pull sensor harness during removal.
INSTALLATION
1. Install rear drive shaft to the vehicle.
2. Temporarily install rear ABS sensor on rear arm.
CAUTION: Be careful not to strike ABS sensor's pole piece and tone wheel's teeth against adjacent metal parts during installation.
3. Install rear sensor harness brackets in the original positions and install harness on the clip.
