Baja F4-2.5L SOHC (2003)
Camshaft: Service and Repair
Camshaft
REMOVAL
1. Remove V-belt.
2. Remove crankshaft pulley.
3. Remove belt cover.
4. Remove timing belt assembly.
5. Remove camshaft sprocket.
6. Remove crankshaft sprocket.
7. Remove belt cover No. 2 (LH).
8. Remove belt cover No. 2 (RH).
NOTE: Do not damage or lose the seal rubber when removing belt covers.
9. Remove tensioner bracket.
10. Remove camshaft position sensor support. (LH side only)
11. Remove oil level gauge guide. (LH side only)
12. Remove valve rocker assembly.
13. Remove camshaft cap.
a. Remove bolts (a) through (b) in alphabetical sequence.
b. Equally loosen bolts (c) through (j) all the way in alphabetical sequence.