Baja F4-2.5L SOHC (2003)
15. Hold engine harness by harness bands (A).
NOTE: Do not use harness band on harnesses where they are supposed to be protected by the fuel pipe protector.
16. Install fuel pipe protector RH.
Tightening torque: 19 N.m (1.9 kgf-m, 13.7 ft-lb)
17. Install fuel pipe protector LH.
Tightening torque: 19 N.m (1.9 kgf-m, 13.7 ft-lb)
18. Connect pressure regulator vacuum hose to intake manifold.
19. Install air assist injector solenoid valve to bracket.
20. Install EGR valve.
21. Install throttle body to intake manifold.