Baja F4-2.5L SOHC (2003)
2. Disconnect washer motor connector.
3. Disconnect rear window glass washer hose from washer motor, then plug connection with a suitable cap.
4. Remove the two bolts which hold the washer tank, then take the tank away from the working area.
5. Remove spark plugs cord by pulling boot, not cord itself.
6. Remove spark plug with the spark plugs socket.
INSTALLATION
RH SIDE
1. Install in the reverse order of removal.
Tightening torque (Spark plug): 21 N.m (2.1 kgf-m, 15 ft-lb)
CAUTION: The above torque should be only applied to new spark plugs without oil on their threads. In case their threads are lubricated, the
torque should be reduced by approximately 1/3 of the specified torque in order to avoid over-stressing.