Baja F4-2.5L SOHC (2003)
9. Insert evaporation hose (H) to pressure control solenoid valve and hold clip.
L = 27.5 ± 2.5 mm (1.083 ± 0.098 in)
10. Tighten bolt which holds fuel filler pipe on body and tighten bolt which holds fuel pressure sensor on fuel filler pipe.
Tightening torque: 7.5 N.m (0.75 kgf-m, 5.4 ft-lb)
11. Insert fuel filler hose approximately 35 to 40 mm (1.38 to 1.57 in) over the lower end of fuel filler pipe and tighten clamp.
12. Jack-up the rear sub frame and tighten bolts which hold rear sub frame on body.
Tightening torque:
T1: 66 N.m (6.7 kgf-m, 48.5 ft-lb)
T2: 172 N.m (17.5 kgf-m, 127 ft-lb)