Baja F4-2.5L SOHC (2003)
10. On the <<Diagnostic Code(s) Display>> display screen, select the {Current Diagnostic Code(s)} or {History Diagnostic Code(s)} and press the
[YES] key.
NOTE:
^
For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.
^
For detailed concerning diagnostic trouble codes, refer to the DIAGNOSTIC TROUBLE CODE LIST.
^
A maximum of 3 trouble codes are displayed in order of occurrence.
*a* refers to the troubles in order of occurrence (Latest, Old, Older).
READ CURRENT DATA
1. On the <<Main Menu>> display screen, select {Each System Check} and press the <<YES>> key.
2. On the <<System Selection Menu,, display screen, select {Brake Control System} and press <<YES>> key.
3. Press the <<YES>> key after the VDC type is displayed.
4. On the <<Brake Control Diagnosis,, display screen, select {Current Data Display & Save} and press the <<YES>> key.
5. On the <<Data Display Menu>> display screen, select {Data Display} and press the <<YES>> key.
6. Using the scroll key, move the display screen up or down until the desired data is shown.