Baja F4-2.5L SOHC (2003)
2. Inspect clearance between the retaining plate and snap ring. (High clutch) At this time, do not press down retaining plate.
Standard value: 0.8 - 1.1 mm (0.031 - 0.043 inch)
Allowable limit: 1.5 mm (0.059 inch)
3. If specified tolerance limits are exceeded, select a suitable high clutch retaining plate.
4. Inspect clearance between retaining plate and snap ring. (Reverse clutch) At this time, do not press down retaining plate.
Standard value: 0.5 - 0.8 mm (0.020 - 0.031 inch)
Allowable limit: 1.2 mm (0.047 inch)
5. If specified tolerance limits are exceeded, select a suitable high clutch retaining plate.