Baja F4-2.5L SOHC (2003)
5. Set the cover on the piston with a press using ST1 and ST2, and attach the snap ring. At this time, be careful not to fold cover seal during
installation.
ST1 498627100 SEAT
ST2 398673600 COMPRESSOR
ST3 498437100 LOW CLUTCH PISTON GUIDE
6. Install the dish plate, driven plates, drive plates, and retaining plate, and secure with the snap ring.
7. Check the low clutch for operation.
1. Remove one-way clutch.
2. Set the one-way clutch inner race, and apply compressed air for checking.
8. Checking low clutch clearance.
