Baja F4-2.5L SOHC (2003)
6. Using ST1 and ST2, install snap ring to rear drive shaft.
ST1 499257300 SNAP RING OUTER GUIDE
ST2 499247400 INSTALLER
7. Install the driven plates, drive plates, pressure plate and snap ring.
8. Apply compressed air to see if the assembled parts move smoothly.
9. Check clearance between snap ring and pressure plate.
10. Press-fit a new ball bearing with ST.
ST 899580100 INSTALLER
11. Coat a new seal ring with Vaseline, and install it in the seal ring groove of the shaft.