Baja F4-2.5L SOHC (2003)
3. Confirm that the retainer spring is securely fitted by observing it through the main case hole.
4. Install the release bearing and fasten it with two clips.
5. Install the release lever seal.
6. Verify that the bearing moves smoothly with operating release fork.
7. Install the transmission assembly.
INSPECTION
RELEASE BEARING
NOTE: Since this bearing is grease sealed and is of a non lubrication type, do not wash with gasoline or any solvent when servicing the clutch.
1. Check the bearing for smooth movement by applying force in the radial direction.
Radial direction stroke: 1.6 mm (0.063 inch)