Baja F4-2.5L SOHC (2003)
11. Extract companion flange using ST.
ST 399703600 PULLER ASSY
12. Remove oil seal using ST.
ST 398527700 PULLER ASSY
13. Fit a new oil seal using ST.
ST 498447120 OIL SEAL INSTALLER
14. Install companion flange.
NOTE: Use a plastic hammer to install companion flange.
15. Tighten new self-locking nut within the specified torque range so that the turning resistance of companion flange becomes the same as that before
replacing oil seal. ST 498427200 FLANGE WRENCH
Tightening torque: 181.4 Nm (18.50 kgf-m, 133.8 ft. lbs.)
16. Reassembling procedure hereafter is the reverse of the disassembling.