Baja F4-2.5L SOHC (2003)
5. Install the snap ring and stay to bushing B.
6. Tighten with a new lock wire to the extent that the boot will not come off.
7. Insert the rod into boot hole.
8. Connect the rod to gear shift lever.
Tightening torque: 11.8 Nm (1.2 kgf-m, 8.7 ft. lbs.)
9. Check the swing torque of the rod in relation to gear shift lever.
10. Check that there is no excessive play and that parts move smoothly.
INSPECTION