Baja F4-2.5L SOHC (2003)
1. Install the pitching stopper.
Tightening torque:
T1: 50 Nm (5.1 kgf-m, 37 ft. lbs.)
T2: 58 Nm (5.9 kgf-m, 43 ft. lbs.)
2. Install the air cleaner case.
3. Connect battery ground cable.
CROSSMEMBER AND CUSHION RUBBER
1. Install the rear cushion rubber.
Tightening torque: 35 Nm (3.6 kgf-m, 26 ft. lbs.)
2. Install the rear crossmember.
Tightening torque:
T1: 75 Nm (7.6 kgf-m, 55 ft. lbs.)
T2: 140 Nm (14.3 kgf-m, 103 ft. lbs.)
3. Remove the transmission jack.
4. Install the heat shield cover.
5. Install the front, center, rear exhaust pipes and the muffler.