Forester F4-2.5L (2008)
^
Do not disassemble the brake booster.
^
If external force is applied from above when brake booster is placed in this position, the resin portion as indicated by "P" may be damaged, so be
careful how it is placed.
INSTALLATION
1) Check and adjust the operating rod of the brake booster.
Standard. "L": 144.6 mm (5.69 in)
If it is out of specification, adjust it with the brake booster operating rod.
2) Mount the brake booster in position.
3) Connect the operating rod to brake pedal with a clevis pin and snap pin.
4) Connect the vacuum hose to brake booster.
