Forester F4-2.5L DOHC Turbo (2007)
2. Remove the rubber cushion, and detach the muffler.
CAUTION: Be careful not to drop the muffler during removal.
NOTE: To facilitate removal, apply a coat of spray type lubricant to the mating area of rubber cushion in advance.
INSTALLATION
Install in the reverse order of removal.
NOTE: Replace with a new gasket and nut.
Tightening torque: 48 Nm (4.9 kgf-m, 35.4 ft. lbs.)
INSPECTION
1. Check the connections and welds for exhaust leaks.
2. Make sure there are no holes or rusting.
3. Check the cushion rubber for wear or crack.