Forester F4-2.5L SOHC (2004)
Throttle Body: Service and Repair
Removal and Installation
REMOVAL
1. Disconnect the ground cable from battery.
2. Remove the air cleaner case.
3. Disconnect the accelerator cable (A).
4. Disconnect the cruise control cable (B). (With cruise control model)
5. Disconnect the connectors from idle air control solenoid valve, throttle position sensor and pressure sensor.
6. Disconnect the air by-pass hose from the throttle body.
7. Disconnect the engine coolant hoses (A) from the throttle body.